OUR PRODUCT
PLANNED PRICE AFTER THE INTRODUCTORY PERIOD 4.995 kr
CLAS CARPILLOW
The CLAS Carpillow supports the vehicle gently from underneath and reduces static load on the tyres, undercarriage and suspension during extended storage.
It is typically inflated so that the tyres still have light contact with the floor while much of the load is taken off the vehicle. Always follow the user guide and never exceed 0.2 bar.
2: Slide the flat Carpillow under the vehicle on the mat
3: Inflate the Carpillow to the required height
4: Check that the vehicle is stable and the tyres still lightly touch the floor
2: 1 x CLAS Carpillow
3: 1 x hose/valve extension
4: 1 x valve connection
PRODUCT AND SAFETY INFORMATION
Manufacturer
:
Clas ApS, Kaalundsvej 9, 7000 Fredericia, Denmark
Electronic contact
: info@clas.as
Manufactured in Poland for Clas ApS.
Product identification
:
CLAS Carpillow
Important safety information
- Maximum pressure: 0.2 bar. Inflate only to the height necessary to support the vehicle correctly.
- Do not place the Carpillow under a hot vehicle. Wait until the engine and exhaust have cooled sufficiently.
- Do not start the vehicle while the Carpillow is underneath it.
- Always use the supplied protective mat and keep the product away from sharp objects.
GENTLE STORAGE FOR CARS THAT MATTER
CLAS was founded by Niels based on his own experience of storing vintage cars, classics and sports cars. Many owners know the challenge of extended storage, where tyres and suspension are exposed to constant static load.
CLAS was created as a simple and practical way to reduce that load during long-term vehicle storage.
FREQUENTLY ASKED QUESTIONS
A CLAS Carpillow is an inflatable support placed underneath a vehicle during long-term storage. It reduces static load on the tyres, undercarriage and suspension.
It is particularly suited to classics, vintage cars, sports cars and other vehicles that remain stationary for extended periods.
Its purpose is to reduce static load while the vehicle is stored. When a car remains in the same position for a long time, tyres can develop flat spots and the suspension remains under constant load. The CLAS Carpillow helps reduce that load.
Place the Carpillow on the supplied protective mat underneath the vehicle and inflate it using a standard air compressor or tyre inflator.
Typically, inflate it until the tyres still lightly touch the floor while much of the static load has been removed. This keeps the vehicle stable while reducing the load.
No. It is normally preferable for the tyres to retain light contact with the floor while much of the load is removed. Follow the user guide and ensure the vehicle remains stable.
The Carpillow is designed for long-term vehicle storage. The appropriate duration depends on correct use, storage conditions and periodic checks. Always follow the user guide.
The Carpillow is made from strong, durable materials, but like any inflatable product it must be used correctly. Always use the supplied protective mat and do not drag it over sharp surfaces.
If the inner cushion is accidentally punctured, the nylon cover can be opened and the inner cushion may be repairable using suitable rubber repair materials. Inspect the repair carefully before reuse.
The CLAS Carpillow is made from natural rubber with a nylon mesh cover, selected for strength, flexibility and durability.
The CLAS Carpillow is manufactured in Poland within the EU for Clas ApS.
You have the statutory remedies that apply if the product is defective or does not conform to the contract. Any separate commercial guarantee is additional to those rights and applies only on the terms expressly stated. Damage caused by misuse, overpressure, heat or sharp objects is not in itself a product defect.
Maximum pressure is 0.2 bar. Inflate only to the height necessary to support the vehicle correctly.
Yes. The Carpillow can be inflated with a standard air compressor or tyre inflator. Fit the supplied valve extension before inflation.
Unscrew the valve extension to release the air. Do not pull the Carpillow out from underneath the vehicle until it is completely deflated and lies flat.
For faster deflation, a standard vacuum cleaner can be used by holding the nozzle over the valve.
No. Rubber and nylon can be damaged or melt on contact with hot components such as the exhaust.
Wait until the engine and exhaust have cooled sufficiently before positioning the Carpillow.
No. Do not start the vehicle while the Carpillow is underneath it. Heat from the exhaust can damage the product.
It is particularly suited to classics, vintage cars, sports cars and other vehicles stored for extended periods. Its flat, uninflated profile also makes it suitable for many low vehicles.
When a vehicle remains stationary for a long time, its weight rests continuously on the same areas of the tyres and suspension. The Carpillow reduces this static load and can help reduce the risk of tyre flat spots during storage.